Manufactur standard 10 Pin RJ45 Connector - JM36111-KD20-4F Single Port 8P8C Modular Jack RJ45 T/H Connector – Zhusun
Manufactur standard 10 Pin RJ45 Connector - JM36111-KD20-4F Single Port 8P8C Modular Jack RJ45 T/H Connector – Zhusun Detail:
JM36111-KD20-4F Single Port 8P8C Modular Jack RJ45 T/H Connector
| Categories | Connectors, Interconnects |
| Modular Connectors - Jacks | |
| Application-LAN | ETHERNET(NoN POE) |
| Connector Type | RJ45 |
| Number of Positions/Contacts | 8p8c |
| Number of Ports | 1×1 |
| Applications Speed | RJ45 Without Magnetics |
| Mounting Type | Through Hole |
| Orientation | 90° Angle (Right) |
| Termination | Solder |
| Height Above Board | 13.40 mm |
| LED Color | Without LED |
| Shielding | Shielded |
| Features | Board Guide |
| Tab Direction | Down |
| Contact Material | Phosphor Bronze |
| Packaging | Tray |
| Operating Temperature | -40°C ~ 85°C |
| Contact Material Plating Thickness | Gold 6.00µin/15.00µin/30.00µin/50.00µin |
| Shield Material | Brass |
| Housing Material | Thermoplastic |
| RoHS Compliant | YES-RoHS-5 WIth Lead in Solder Exemption |
Why does RJ connector appear false soldered RJ connector? We opened the RJ connector, and we saw that the solder joints were fake soldering, or the copper wire coil was broken. Why is this? It is fully testable on the RJ manufacturing end. But why are they leaked to the client application before they are discovered?
The commonly used test equipment is LCR Meter, which is the inductance capacitance resistance tester. The shortcoming of this kind of test equipment is that it cannot measure DC resistance, only AC impedance, and the connection of the test line is long, and a relay is required, which invisibly increases the AC impedance value of the entire test line, so the AC impedance The test limit cannot be set too small, usually set to 5ohms, otherwise quite a lot of RJ connectors with good line connections will also be labeled as defective and cannot be manufactured.
In this kind of test equipment, we can test the DC resistance, and the test limit can be set to 1.5ohms or even below 1ohm. In this way, any RJ connector with a slightly poor line connection can be typed out as a defective product Reduce the risk of leakage to the application side.
Product detail pictures:
Related Product Guide:
We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Manufactur standard 10 Pin RJ45 Connector - JM36111-KD20-4F Single Port 8P8C Modular Jack RJ45 T/H Connector – Zhusun , The product will supply to all over the world, such as: Dubai, Bulgaria, Norwegian, With the goal of "zero defect". To care for the environment, and social returns, care employee social responsibility as own duty. We welcome friends from all over the world to visit and guide us so that we can achieve the win-win goal together.
By Sandra from Kazakhstan - 2017.03.07 13:42
This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
By Mildred from Holland - 2017.09.29 11:19
