China 2501551-6 Compatible ZhuSun Jack Single Port 1 x 1 Standard Connector Jack Shielded Cat 5 factory and manufacturers

2501551-6 Compatible ZhuSun Jack Single Port 1 x 1 Standard Connector Jack Shielded Cat 5

Number of Ports: 1X1

Speed: RJ45 Without Magnetics

Application-Lan : NoN PoE

Latch: UP

LED: Without LED

Orientation : 90°Angle (Right)

Compatible Brand : TE/Tyco

Mounting Type: Through Hole

Shielding: Shielded

Temperature: ﹣40 TO ﹢85

Product Length (mm): 15.70

Product Height (mm): 13.50

Product Width (mm): 16.40

Part Number:2501551-6

Send email to us

Product Detail

Contact Us

Product Tags

Similar Part No

2501550-1 Compatible ZhuSun Jack Single Port 1 x 1 Standard Connector Jack Shielded Cat 5

Categories	Connectors, Interconnects
Categories	Modular Connectors - Jacks
Application-LAN	ETHERNET(NoN POE)
Connector Type	RJ45
Number of Positions/Contacts	8p8c
Number of Ports	1x1
Applications Speed	RJ45 Without Magnetics
Mounting Type	Through Hole
Orientation	90° Angle (Right)
Termination	Solder
Height Above Board	13.40 mm
LED Color	Without LED
Shielding	Shielded
Features	Board Guide
Tab Direction	UP
Contact Material	Phosphor Bronze
Packaging	Tray
Operating Temperature	-40°C ~ 85°C
Contact Material Plating Thickness	Gold 6.00µin/15.00µin/30.00µin/50.00µin
Shield Material	Brass
Housing Material	Thermoplastic
RoHS Compliant	YES-RoHS-5 WIth Lead in Solder Exemption

The electrical properties of the RJ connector include contact resistance, insulation resistance and dielectric strength.
① Electrical connectors with high-quality contact resistance should have low and stable contact resistance. The contact resistance of the connector ranges from a few milliohms to tens of milliohms.
②Insulation resistance is a measure of the insulation performance between the contacts of electrical connectors and between the contacts and the shell, and its magnitude ranges from hundreds of megohms to thousands of megohms.
③ Dielectric strength, or withstand voltage, dielectric withstand voltage, is the ability to withstand the rated test voltage between the connector contacts or between the contacts and the shell.