5569380-1 Without LED 8P8C Network Jack 2×1 Port RJ45 Connector
5569380-1 Without LED 8P8C Network Jack 2×1 Port RJ45 Connector
| Categories | Connectors, Interconnects |
| Modular Connectors - Jacks | |
| Application-LAN | ETHERNET(NoN POE) |
| Connector Type | RJ45 |
| Number of Positions/Contacts | 8p8c |
| Number of Ports | 2×1 |
| Applications Speed | RJ45 Without Magnetics |
| Mounting Type | Through Hole |
| Orientation | 90° Angle (Right) |
| Termination | Solder |
| Height Above Board | 25.27 mm |
| LED Color | Without LED |
| Shielding | Shielded |
| Features | Board Guide |
| Tab Direction | UP & Down |
| Contact Material | Phosphor Bronze |
| Packaging | Tray |
| Operating Temperature | -40°C ~ 85°C |
| Contact Material Plating Thickness | Gold 6.00µin/15.00µin/30.00µin/50.00µin |
| Shield Material | Brass |
| Housing Material | Thermoplastic |
| RoHS Compliant | YES-RoHS-5 WIth Lead in Solder Exemption |
Under what conditions should the RJ connector use direct connection and under what conditions should twisted-pair cables be used?
When the following devices are interconnected, the RJ connector needs to use a crossover cable:
1. The RJ connector switch is connected to the switch through the UPLINKS port;
2. RJ connector HUB is connected to the switch;
3. RJ connector between HUB and HUB;
4. RJ connector Two PCs are directly connected;
5. The connection between the RJ connector router interface and other router interfaces;
6. The ADSL Modem of the Ethernet interface of the RJ connector is connected to the network card interface of the PC.
5569380-1
Write your message here and send it to us
