probanner

products

6116353-8 1×2 Jack Modular Connector 8p8c (RJ45, Ethernet) 90° Angle (Right) Shielded, EMI Finger Cat5

  • Number of Ports: 1X2
  • Speed: RJ45 Without Magnetics
  • Application-Lan : NoN PoE
  • Latch: UP
  • LED: With LED
  • Orientation : 90°Angle (Right)
  • Compatible Brand : TE/Tyco
  • Mounting Type: Through Hole
  • Shielding: Shielded, EMI Finger
  • Temperature: ﹣40 TO ﹢85
  • Product Length (mm): 15.70
  • Product Height (mm): 13.50
  • Product Width (mm): 32.20

  • Part Number:6116353-8
  • Product Detail

    Contact Us

    Product Tags

    Similar Part No

    HCJT2-802SK-L11 8P/8C Shielded Dual Port Tab-Up Ethernet RJ45 Connectors

    RJ45 Connector 1x2

    Categories  Connectors, Interconnects
     Modular Connectors - Jacks
    Application-LAN  ETHERNET(NoN POE)
    Connector Type  RJ45
    Number of Positions/Contacts  8p8c
    Number of Ports  1×2
    Applications Speed  RJ45 Without Magnetics
    Mounting Type  Through Hole
    Orientation  90° Angle (Right)
    Termination  Solder
    Height Above Board  13.40 mm
    LED Color  With LED
    Shielding  Shielded, EMI Finger
    Features  Board Guide
    Tab Direction  UP
    Contact Material  Phosphor Bronze
    Packaging  Tray
    Operating Temperature  -40°C ~ 85°C
    Contact Material Plating Thickness  Gold 6.00µin/15.00µin/30.00µin/50.00µin
    Shield Material  Brass
    Housing Material  Thermoplastic
    RoHS Compliant  YES-RoHS-5 WIth Lead in Solder Exemption

     

    Mechanical performance As far as the connection function is concerned, the insertion force is an important mechanical performance. Insertion force is divided into insertion force and extraction force (extraction force is also called separation force), and the requirements of the two are different. There are regulations on insertion force and small separation force in the relevant standards, which indicates that from the point of view of use, the insertion force is small (there is a structure with low insertion force LIF, but insertion force ZIF does not). If the separation force is too small, it will affect the reliability of the contact. The insertion force and mechanical life of the connector are related to the structure of the contact part (positive pressure), the coating quality of the contact part (coefficient of sliding friction) and the dimensional accuracy (alignment) of the contact device.

     

     


  • Previous:
  • Next:

  • 6116353-8

    Write your message here and send it to us