6339082-1 With LEDs 8P8C Modular Jack 2×4 Stacked Port RJ45 Ethernet Connector
6339082-1 With LEDs 8P8C Modular Jack 2×4 Stacked Port RJ45 Ethernet Connector
| Categories | Connectors, Interconnects |
| Modular Connectors - Jacks | |
| Application-LAN | ETHERNET(NoN POE) |
| Connector Type | RJ45 |
| Number of Positions/Contacts | 8p8c |
| Number of Ports | 2×4 |
| Applications Speed | RJ45 Without Magnetics |
| Mounting Type | Through Hole |
| Orientation | 90° Angle (Right) |
| Termination | Solder |
| Height Above Board | 27.25 mm |
| LED Color | With LED |
| Shielding | Shielded, EMI Finger |
| Features | Board Guide |
| Tab Direction | UP & Down |
| Contact Material | Phosphor Bronze |
| Packaging | Tray |
| Operating Temperature | -40°C ~ 85°C |
| Contact Material Plating Thickness | Gold 6.00µin/15.00µin/30.00µin/50.00µin |
| Shield Material | Brass |
| Housing Material | Thermoplastic |
| RoHS Compliant | YES-RoHS-5 WIth Lead in Solder Exemption |
After selecting the correct RJ connector type, pay attention to the size of the outlet hole of the plug to avoid water leakage when the cable is smaller than the diameter. When selecting the RJ connector, consider the shielding coating to avoid salt spray. When connecting the RJ connector, it is necessary to follow the corresponding contact point Serial number termination. The RJ connector should be prevented from being energized before the end of the locking.
Write your message here and send it to us
